One of the most difficult and most personal choices in your design is deciding what type of finish your cabinetry will be. Traditional hand wiped stain? Gorgeous paint? Choosing just the “right” color can lead to some very interesting discussions when planning your palette!

Let’s take a look at what we can create for you…

STAIN

The beauty of wood grain is never in doubt, with an unmistakable warmth that no other finish can match. And with our skilled finishing team, we create some of the most beautiful and durable finishes for your cabinetry.  We offer a full range of high-solids furniture stains, from light and subtle to rich and dramatic.

The process starts with stain being carefully hand applied, and hand wiped. Pieces are then set aside; this important pause allows the stain to achieve the necessary depth and readies the pieces for the next step: our sealer coat.

Using a catalyzed varnish we hand spray our sealer coat, laying down the proper thickness to provide the foundation of a beautiful and durable clearcoat. Once sprayed, pieces are rolled into the oven, and baked at 130° for twenty minutes. This is not a process that can be duplicated on jobsite-made cabinetry, and is essential for a truly long-lasting and beautiful finish.

When all pieces have cooled, they are hand sanded with an ultrafine grit sandpaper, and then rubbed with a tack cloth to remove the smallest traces of dust.

Next, it’s back to the spray booth, where our skilled sprayers apply the topcoat, using another catalyzed conversion varnish. All freshly topcoated pieces head back to the oven, for another twenty minute baking at 130°. This final baking is equally critical, as it promotes the cross-linking between the sealer and topcoat, yielding our famous gorgeous finish. This carefully controlled finishing process cannot be duplicated by any local cabinetmaker.

PAINT (We offer two types!)

Acromapro Paint

Our Acromapro paint is comprised of one coat of water based stain blocking primer and two coats of water based pigmented acrylic urethane paint. As with all our finishes, we apply this paint in our controlled finishing area that’s designed to maximize quality and consistency. We are proud to say this finish is both low in VOC and formaldehyde free.

We offer a complete and diverse “Crown Point Collection” of 158 standard colors based on the Sherwin Williams color palette with a premium option to custom mix colors from the entire Sherwin Williams palette as well as the color offerings of other paint manufacturers. This finish is offered in both sprayed and brushed applications.

To view our Paint Color Collection, click the image or click here.

Milk Paint

Milk Paint Vanity
Milk Paint Cabinetry

Milk Paint is a hand-brushed finish that starts as a pigmented powder made from natural materials; milk protein, lime, earth pigments, and clay fillers. The formula dates back to ancient Egypt, and up until the 1800’s, was not commercially available. (You made your own!)
Burnishing is an option with Milk Paint. (Note: Pine comes standard in burnished only.) Essentially, burnishing is precision sanding of the top color to reveal some of the undercoat. Burnishing can enhance your Milk Paint kitchen by giving you an option to have a contrasting color show through. If you prefer, even use one of our stains as the base coat. Burnished or not, your cabinetry is still given our tough-as-nails finish as described below.

We start by hand mixing the powder with water to get the desired consistency, and, using a brush, begin to paint.

Milk painting a door, wainscotting, or any part with frame and panel, requires more steps. To do the job right, we paint before the component is assembled. Otherwise, paint can “bridge” between the panel and frame, and over time and seasonal changes, creating tear lines due to natural wood movement. We paint the completed panel, and brush the inside edges of the stiles and rails that make up the frame.

Once dry, the parts are brought back to the appropriate team, assembled, and worked as needed.

After the hand brushed paint has dried, we spray the sealer coat with our catalyzed varnish. Into the oven it goes, for twenty minutes at 130°.

Once cooled, the parts are hand sanded with an ultrafine grit sandpaper, and then rubbed with a tack cloth to remove the smallest traces of dust.

Next, it’s back to the spray booth, where our skilled sprayers apply the topcoat, using our catalyzed conversion varnish. All freshly topcoated pieces head back to the oven, for another twenty minute baking at 130°. This final baking is equally critical, as it promotes the cross-linking between the sealer and topcoat.

This is not a process that can be duplicated by any local cabinetmaker!

Crown Point Cabinetry logo

Crown Point Cabinetry
462 River Road • Claremont, NH 03743

800-999-4994
info@crown-point.com

Island 12
Pantry 14

March 30 Update:

Crown Point Cabinetry has been deemed an essential business by the Governor of New Hampshire. As such, we are in business, crafting cabinetry and taking on new orders. While we continue to operate, we are taking all necessary precautions to keep our entire team safe. In order to limit face-to-face interactions, our showroom is not open to visitors until May 4th, 2020. In the meantime, see our virtual shop tour here.

If you have a project you would like to discuss, please give us a call. We are here to help!

Breakfast Nook 5
Breakfast Nook 4
Breakfast Nook 1
Pantry 13
Pantry 06
Home Bar 05
Pantry 10
Built-Ins 06
Built-Ins 05
Built-Ins 12
Laundry 08
Office 14
Office 17
Office 06
Range Hood 28
Range Hood 07
Range Hood 19
Range Hood 03
Home Bar 03
Home Bar 09