Procedure:

1. Open the door and provide support (enlist the help of another individual, or if weight and size of door is within your abilities, hold door with one hand)
2. Locate screws "B" on BOTTOM hinge, and, using a #2 square head driver, loosen both screws. Note: Screws need only be loosened approximately 1-2 turns.
3. Slide hinge outwards (indicated by arrows in photo below), then re-tighten screws "B".
4. Close door, and check alignment. If necessary, repeat steps 1-3 until door is flush with face of front frame.

Door is too low

Door is too high

Door is too close to non-hinge side

Door is too far from non-hinge side

Door is tilted left

Door is tilted right

Door sticks out at bottom