Door is tilted right

NOTE: PLEASE MAKE SURE YOUR DOOR IS CONTINUALLY SUPPORTED AS YOU MAKE ANY ADJUSTMENTS. FAILURE TO DO SO MAY RESULT IN DAMAGE TO YOUR DOOR OR INJURY TO YOURSELF!

Procedure:

  1. Open the door and provide support (enlist the help of another individual, or if weight and size of door is within your abilities, hold door with one hand)
  2. Locate screw "A" on each hinge, and, using a #2 square head driver, loosen both screws. Note: Screws need only be loosened approximately 1-2 turns.
  3. Rotate door approximately 1/16", then re-tighten screws "A".
  4. Close door, and check alignment. If necessary, repeat steps 1-3 until gaps above, below, left and right of door are equal.


< Back to Hinge Adjustments

< < Back to Care and Cleaning
Other hinge adjustments:

Door is too low

Door is too high

Door is too close to non-hinge side

Door is too far from non-hinge side

Door is tilted left

Door sticks out at top

Door sticks out at bottom