|Door is tilted left
||NOTE: PLEASE MAKE SURE YOUR DOOR IS CONTINUALLY SUPPORTED AS YOU MAKE ANY ADJUSTMENTS. FAILURE TO DO SO MAY RESULT IN DAMAGE TO YOUR DOOR OR INJURY TO YOURSELF!
- Open the door and provide support (enlist the help of another individual, or if weight and size of door is within your abilities, hold door with one hand)
- Locate screw "A" on each hinge, and, using a #2 square head driver, loosen both screws. Note: Screws need only be loosened approximately 1-2 turns.
- Rotate door approximately 1/16", then re-tighten screws "A".
- Close door, and check alignment. If necessary, repeat steps 1-3 until gaps above, below, left and right of door are equal.