Procedure:

1. Open the door and provide support (enlist the help of another individual, or if weight and size of door is within your abilities, hold door with one hand)
2. Locate screw "A" on each hinge, and, using a #2 square head driver, loosen both screws. Note: Screws need only be loosened approximately 1-2 turns.
3. Allow door to slide downward approximately 1/16", then re-tighten screws "A".
4. Close door, and check alignment. If necessary, repeat steps 1-3 until gaps above and below door are equal.

Door is too low

Door is too close to non-hinge side

Door is too far from non-hinge side

Door is tilted right

Door is tilted left

Door sticks out at top

Door sticks out at bottom